Autocad Floor Plans In AutoCAD,how Do You Make A Floor Plan Fit To A Certain Scale E.g 1:50 Ready For Printing?

In AutoCAD,how do you make a floor plan fit to a certain scale e.g 1:50 ready for printing? - autocad floor plans

To do this in AutoCAD 2004 (other versions may also be such, I think ..)
1] View all images on the screen and click File> Synopsis: ..
2] instead of TAB devices, select your printer ...
3] tab on the site .. You will see many sections
4] units, and the paper size selected paper size ....
Then country> CLOSE
Then the graphics window you can select the area with the cursor, click and drag on and create a rectangle that contains the party that wanted to develop print ...
5] scale: there are 2 In principle, you can choose the amount of pressure ... But there are ways both Autocad [It is possible that everyting has prepared with 1 unit of 1 cm have been. Article 1 unit or> 1 mm or control of 1 unit> 1 rule of a meter, you use this .. I use the classic way of defining complex units such as millimeters in the drawings that I see on the printed page .... AS: Scale 1 / 50, Article 100 was using 1 unit> on the 1 cm rule, must be printed on paper will be 20 mm / 2 cm .... Below the PLOT-scale to the pressure scale as follows ...